Solenoid Operated Deluge Valve

Product Advantages

  • UL Listed / ULC Listed Main Valves – 3 – 12 inch sizes*
  • Fast Acting Solenoid Control
  • Reliable Drip Tight Shut-off
  • Simple Design, Proven Reliable
  • Easy Installation & Maintenance

The Cla-Val Model 134-05 Solenoid Control Valve is an on-off control valve which either opens or closes upon receiving an electrical signal to the solenoid pilot control. This valve consists of a 100G/2100G UL/ULC Listed Hytrol Main Valve, a three-way solenoid valve and an auxiliary pilot valve. This pilot control system alternately applies pressure to/or relieves pressure from the diaphragm chamber of the main valve. It is furnished either normally open (de-energize solenoid to open) or normally closed (energize solenoid to open).

Note: For seawater applications use 100GS/2100GS main valve

Please note that the UL and ULC Listings apply to the
100G/2100G Hytrol Main Valve equipped with the
trim configuration of Model 134-05

Schematic Diagram
Item Description
1.  100G/2100G UL/ULC
Listed Hytrol Main Valve
2.  CS3 Solenoid Control
3.  100-01 Hytrol Pilot Valve
4.  X58C Restriction Orifice
5.  X46A Flow Clean Strainer

Optional Features
Item Description
C.  CV Flow Control (closing)
F.  Independent Operating
P.  X141 Pressure Gauge


Globe: 3” – 12” flanged
Globe: 3″ – 8″ grooved
Angle: 3” – 12” flanged

Ductile Iron 150 ANSI B16.42 flanged
Ductile Iron 300 grooved
Cast Steel 150 ANSI B16.5 flanged

150 class, 250 psi maximum (Ductile Iron)
150 class, 285 psi maximum (All other materials)
300 class, 300 psi maximum (All materials)

Water: to 180° F. Max


Main valve body & cover:
Ductile Iron ASTM A-536*
Cast Steel ASTM A216-WCB*
Naval Bronze ASTM B61
Nickel Aluminum Bronze ASTM B148
Super Duplex Stainless Steel
Stainless Steel ASTM A743-CF-8M

Main valve trim:
Bronze / Stainless Steel

Pilot control system:
Cast Bronze ASTM B62
UL /ULC Listed 3″ – 12″

Cover Capacity

Functional Data

Pilot System Specifications

Temperature Range
Water: to 180°F

Air, water, light oils

Rubber Parts
Buna-N® Synthetic Rubber

Solenoid Control*
Brass ASTM B283
NEMA Type 1, 2, 3, 3S, 4, 4X general purpose
NEMA Type 6, 6P, 7, 9 watertight
Explosion Proof available at extra cost

110, 220 -50Hz AC
24, 120, 240, 480 – 60Hz AC
6, 12, 24, 120, 240 – DC
Others available at extra cost
Max. operating pressure differential: 200 psi

Insulation molded Class F
Watts AC 6
AC Volt Amps Inrush 30
AC Volt Amps Holding 16
Watts DC 10.6
Solenoid Manual operator included.
UL / ULC Listed 100G/2100G
Hytrol Main Valve: 3″ – 12″
*Optional material available for Seawater Service

When Ordering,
Please Specify
1. Catalog No. 134-05
2. Valve Size
3. Pattern – Globe or Angle
4. Pressure Class
5. Threaded, Flanged or Grooved
6. Material Desired
7. Energized or De-energized to
Open Main Valve
8. Solenoid Enclosure,
Voltage & Hertz
9. When Vertically Installed