Fire Deluge Solenoid and Remote Control Valve for Sea Water Service

Product Advantages

  • cULus Listed
  • Fast Acting Solenoid Control
  • Reliable Drip Tight Shut-off
  • Simple Design, Proven Reliable
  • Easy Installation & Maintenance

The Cla-Val Model 134-61 Seawater Service Solenoid Control Valve is an on-off pneumatic/hydraulic control valve which either opens or closes upon receiving an electrical signal to the solenoid pilot control.

This valve consists of cULus listed 100GS/2100GS hytrol main valve, a three-way solenoid valve and an auxiliary pilot valve. This pilot control system alternately applies pressure to/or relieves pressure from the diaphragm chamber of the main valve. It is furnished either normally open (de-energize solenoid to open) or normally closed (energized solenoid to open).

Schematic Diagram

Item Description
1.  100GS Hytrol Main Valve
2.  CS3XM Solenoid Control
3.  100-02 Powertrol (Auxiliary Valve)
4.  X58C Restriction Assembly
5.  Ball Valve
6.  Regulator


Globe: 3” – 12” flanged
Angle: 3” – 12” flanged

Ductile Iron 150 ANSI B16.42 flanged
Cast Steel 150 ANSI B16.5 flanged

150 class, 250 psi maximum (Ductile Iron)
150 class, 285 psi maximum (Cast Steel)
300 class, 400 psi maximum

Water: to 180˚ F. Max


Main valve body & cover
Ductile Iron ASTM A-536*
Cast Steel ASTM A216-WCB*
Nickel Aluminum Bronze ASTM B148 C95800
Super Duplex Stainless Steel ASTM A890 GR5A
Stainless Steel ASTM A743-CF-8M

Main valve trim:
Bronze / Monel

Tubing & Fittings
316 SST, Monel, or 2507 SDS

Pilot control system:
Cast Bronze ASTM B61
cULus Listed 3” – 12”

Functional Data

Cover Capacity

Pilot System Specifications

Temperature Range
Water: to 180˚F

Air, water, light oils

Rubber Parts
Buna-N® Synthetic Rubber

Solenoid Control*
316 SS
NEMA Type 1, 2, 3, 3S, 4, 4X general
purpose watertight
NEMA Type 6, 6P, 7, 9 watertight
Explosion Proof available at extra cost

110, 220 -50Hz AC
24, 120, 240, 480 -60Hz AC
6, 12, 24, 120, 240 – DC
Others available at extra cost

Max. operating pressure differential: 200 psi
Insulation molded Class F
Watts AC 6
AC Volt Amps Inrush 30
AC Volt Amps Holding 16
Watts DC 10.6

Manual operator available at extra cost.

cULus Listed: 3” – 12”
*Optional material available for Seawater Service

When Ordering,
Please Specify
1. Catalog No. 134-60
2. Valve Size
3. Pattern – Globe or Angle
4. Pressure Class
5. Threaded, Flanged or Grooved
6. Material Desired
7. Energized or De-energized to
Open Main Valve
8. Solenoid Enclosure, Voltage
& Hertz
9. When Vertically Installed