Shop

Home / Resilient Wedge Gate Valve / Flanged Resilient OS&Y Gate Valve, F4 (XZ41X), PN10/16, UL/FM Approved
mech-01

Flanged Resilient OS&Y Gate Valve, F4 (XZ41X), PN10/16, UL/FM Approved

Gate valves serve to cut the medium flow in the piping system, widely used in the field of potable water, water supply and drainage, sewage disposal, irrigation, air conditioning, fire protection as well as chemical and energy industry

Product Description

  1. Material: Ductile Iron EN-GJS-450-10 Body, bonnet, wedge, handwheel and operating nut are all produced in ductile iron material which provides guarantee for high strength and good corrosion resistance.
  2. Triple O-ring Stem Seals The lower O-ring isolates the stem thrust collar bearing area from the waterway. The upper two O-rings can easily be replaced in the line while the valve is under pressure in the open position.
  3. Stainless Steel Stem, Brass Thrust Collar and Bronze Wedge Nut This life-tested MEIDE design has repeatedly proven its superior strength and abrasive resistance.
  4. Fusion Bonded Epoxy Coating Fusion bonded epoxy coating in accordance with ANSI/AWWA C550 for both interior and exterior surface which provides reliable corrosion resistance.
  5. Long Service Life with Resilient Seat Cycling Test 1,000 times The Valve has been subjected to 1,000 cycles of operation at a maximum rate of 6 cycles of operation per minute from fully closed to fully open and from fully open to fully closed positions under cycled hydrostatic pressure.

Reviews

There are no reviews yet.

Be the first to review “Flanged Resilient OS&Y Gate Valve, F4 (XZ41X), PN10/16, UL/FM Approved”

Your email address will not be published. Required fields are marked *

Contact Us

We're not around right now. But you can send us an email and we'll get back to you, asap.

Not readable? Change text. captcha txt