MECH – Resilient Wedge Gate Valve

Home / MECH / MECH – Resilient Wedge Gate Valve

Gate valves serve to cut the medium flow in the piping system, widely used in the field of potable water, water supply and drainage, sewage disposal, irrigation, air conditioning, fire protection as well as chemical and energy industry.

  • Body, Bonnet, Wedge & Operating Nut in Ductile Iron
  • Triple O-ring Stem Seals
  • Stainless Steel Stem and Brass Thrust Collar
  • Bronze Alloy Wedge Nut
  • Fusion Bonded Epoxy Coating


  • Material: Ductile Iron EN-GJS-450-10
    Body, bonnet, wedge, handwheel and operating nut are all produced in ductile iron material which provides guarantee for high strength and good corrosion resistance.
  • Triple O-ring Stem Seals
    The lower O-ring isolates the stem thrust collar bearing area from the waterway. The upper two O-rings can easily be replaced in the line while the valve is under pressure in the open position.
  • Stainless Steel Stem, Brass Thrust Collar and Bronze Wedge Nut
    This life-tested MEIDE design has repeatedly proven its superior strength and abrasive resistance.
  • Fusion Bonded Epoxy Coating
    Fusion bonded epoxy coating in accordance with ANSI/AWWA C550 for both interior and exterior surface which provides reliable corrosion resistance.
  • Long Service Life with Resilient Seat Cycling Test 1,000 times
    The Valve has been subjected to 1,000 cycles of operation at a maximum rate of 6 cycles of operation per minute from fully closed to fully open and from fully open to fully closed positions
    under cycled hydrostatic pressure.

Flanged Resilient OS&Y Gate Valve, F4 (XZ41X), PN10/16, UL/FM Approved

  • Connection Ends: Flange to DIN EN 1092-2:1997
  • Working Pressure: PN10/16
  • Temperature Range: 0℃- 80℃
  • Coating: Fusion Bonded Epoxy Coating in accordance with ANSI/AWWA C550
Contact Us

We're not around right now. But you can send us an email and we'll get back to you, asap.

Not readable? Change text. captcha txt